Wärtsilä High voltage training breaker

Real Hardware Solution: 

• Breaker is compatible with the existing Wärtsilä TechSim simulators with high-medium voltage systems.  
• High voltage distribution systems can be used in several ship types, including DE Cruise ship, Steam Turbine LNG Carrier, and DE LNG Tanker.  
• Breaker can attach to a single PC running TechSim, providing a standalone trainer.  
• Breaker Removal Tools  
• Test Equipment  
• Personal Protective Equipment (PPE)  

Smart Realities Solution: 

• High voltage distribution systems can be used in a DFDE Dual Fuel Diesel Electric LNG Carrier.  
• VR Headset 
• Dedicated PC  

• The lower part of the breaker comprises a real breaker operated by the simulator electrical system mathematical model.  
• The upper panel contains the instruments and controls for a typical high voltage generator.    
• The controls and instruments are connected to the simulator model via a digital analogue interface.  
• The simulation for LCD type Power Management System controllers uses a precisely developed small touch screen display that replicates the controller functionality.     
• The simulator is connected to the breaker using a Wago COTS automation interface which may also be used for automation training.  
• The bus ties and generator breakers are installed in the main switchboard and typically have ‘front loading’ Vacuum Circuit Breakers.  
• The electrical systems are of standard design and operate at the following voltages:  
• Up to 6600 v
• 3 phases  
• 60 Hz  
• Generators 3350 to 4000 kW  

Wärtsilä High Voltage Training Breaker is designed to meet the requirements set out in Sections A-III/1, A-III/2, A-III/6 & B-III/2 of the STCW Code 2010 (Manila Amendments). 

Simulator Interface - Smart Realities:
Like its hardware counterpart, this solution also allows the user to carry out racking in and out of the breaker and troubleshooting faults can be inserted from the instructor -- all in a completely safe VR environment.

Download brochure