FOS hero image
Navi-Radar

Integrated radar system that directly connects with ECDIS to provide advanced situational awareness and support route optimisation.

Overview

Navi-Radar is fully integrated with Navi-Sailor ECDIS and its navigational data for the best situational awareness. Built on the Fleet Operations Solutions (FOS) software platform, it perfectly integrates a connected ECDIS and radar. It allows for remote troubleshooting from ashore to ensure up-time. Radar data and target information are shared via a Type Approved cyber-secure connection to the Fleet Operation Centre and is available ashore for investigation. Navi-Radar helps increase safety through a clear situation picture due to the radar overlay function and easy integration into the Navi-Sailor ECDIS using the same user interface.

Navi-Radar 4000 MFD is designed in full compliance with the latest IMO, IHO and IEC standards and resolutions. NR 4000 is a PC-based radar system with advanced ARPA, AIS and Chart Radar facilities.

Key benefits

  • User friendly, clear and logically structured interface, consistent within all other MFD tasks
  • Chart Radar with support of different chart formats: SENC/ENC/S-57 and Transas TX-97 charts
  • NR4000 MFD is able to combine the radar picture from any 2 of maximum 4 transceivers
  • Integrated with Navi-Sailor 4000 ECDIS:
    • fully integrated navigational data for the best situational awareness
    • shared targets, routes, charts, settings between ECDIS and radar
    • adds radar overlay to the ECDIS for additional navigation safety

Key features

  • Acquires and process up to 80 ARPA targets
  • Displays of up to 256 AIS targets
  • Association of AIS targets with ARPA targets
  • Advanced clutter suppression with improved auto sea and Offshore/Harbour mode and 3-level accumulation
  • D3D video acceleration for trails presentation, which enables to save trails when switching modes
  • Trial Maneuvering function to calculate the own ship safe maneuver, correlating target motion lines and the planned own ship motion line with the selection of different parameters of the intended maneuver
  • Additional information from sensors could be displayed in Navi-Radar left information panel (Conning):
    • Echo Sounder
    • Wind Sensor
    • Set/Drift
    • Monitored route data
    • Heading and ROT
    • Water and ground speeds

Additional information

Configuration

Wärtsilä Navi-Radar is type approved and is available in the following X and S-band configurations:

  • Available as CAT I (26” screen) and CAT II (24” screen) (*)
  • X-band: 10 KW and 25 KW with 6ft antenna
  • S-band: 30 KW with 12 ft antenna.
  • Below deck unit – RS6 Marine Computer
  • Power supply and Cable kit
    (*) CAT I is mandatory for vessels >= 10,000 GT

Model setup

 

NR 4000 Premium 19/24 CAT2 or 26 CAT1 10kW X-band 24VDC incl. PM and 6ft. Antenna

Radar 1
  • 10 X-band 24VDC incl. PM
  • 6ft. Antenna
  • Scanner control unit SCU-J
  • 19“/24’’ or 26’’ LED Display, AC/DC – Marine Computer RS6C
  • ES6 Keyboard and Trackball
  • Transas UPS-W KIT 6 220/110V 3,4AH – Cable from 10m to 65m
  • Installation Kit

 

 

NR 4000 Premium 19/24 CAT2 or 26 CAT1 30kW S-band 220VAC incl. PM and 12ft. Antenna

Radar 2
  • 30kW S-band 220VAC incl. PM
  • 12ft. Antenna
  • Scanner control unit SCU-J
  • 19“/24’’ or 26’’ LED Display, AC/DC – Marine Computer RS6C
  • ES6 Keyboard and Trackball
  • Transas UPS-W KIT 6 220/110V 3,4AH
  • Power Supply kit 29.5VDC for NKE-1130 30kW Scanner – Junction Box NQE-3151A
  • Cable from 10m to 65m
  • Installation kit

 

Related content

Voyage Insights article
3 Oct 2022 · Article
5 min read
Machine learning: The next maritime frontier?
As the availability of data for high performance computing is increasing alongside the adoption of...
10 Jun 2021 · Article
3 min read
Assisting Pride of Hull to navigate the North Sea with three generations of NACOS
Shipping is entering an era where vessels will continue to have...